Server Not Connected
Server is DMZ, set to 28001, using the bind to my ip address in serverprefs.cs
Still cannot connect, wtf - help!
using modified Classic Dedicated bat file that was in the install.
Pointing directly to -serverprefs
\,,,,\,,,\serverprefs.cs
What else could it be?
It showed up in th master list 1x and hasn't shown up since.
Edit: Is it best practice to run the server on default port?
UDP 28000 ? Open, DMZ set. Still no go.
Still cannot connect, wtf - help!
using modified Classic Dedicated bat file that was in the install.
Pointing directly to -serverprefs
\,,,,\,,,\serverprefs.csWhat else could it be?
It showed up in th master list 1x and hasn't shown up since.
Edit: Is it best practice to run the server on default port?
UDP 28000 ? Open, DMZ set. Still no go.
Comments
What router do you have? Unfortunately, many consumer routers realy don't do dmz, it's a fake dmz, meaning not all traffic is allowed to or from the host in the dmz.
I thought i was using autoexec\serverprefs.cs
When it should have been prefs\serverprefs.cs
CPL's Ren Server is now online.
Now I need to step backwards, and non-dmz the host and strictly leave port 28001 open to the internal ip (UDP).
What happened to your server? Did you change your mind?
you saying it showed up once leads me to believe your local IP is dynamically changing over a set period of time, ensure that your router's firewall settings match your local IP.